32
Salinity
Highlight Salinity.
Press Modify.
Calibration Timeout
Highlight Calibration timeout.
Press Modify.
Use the / keys to set the desired value.
Press Accept to confirm or ESC to return without saving.
Note: If enabled “CAL DUE” warning will be displayed after Calibration timeout period has
elapsed since the previous calibration.
PARAMETER SCREENS
SETUP
Language Message display language Up to 3 languages English
Beep ON Beeper Status Enabled or Disabled Disabled
Instrument ID Instrument identification 0000 to 9999 0000
Baud Rate Serial Communication to PC 600, 1200, 2400, 4800,
9600
9600
Meter Information Displays general information
To Next Page
Loading...
