Getting Start
USER’S MANUAL 5
1.2 The User interface
Click the software icon on the desk after you finished the software setting and equipment
connecting. Then a user interface will be showed as follows:
Description:
1. Data List
2. Description
DC: DC voltage/DC current measurement
AC: AC voltage/AC current measurement
: Diode measurement
: On-Off test
: Capacitance measurement
3. Manual/Auto: Select manual or auto measurement type.
4. Measured value
5. Trend chart
6. Voltage button
7. Current button
8. Resistance button
9. Diode button
To Next Page
Loading...