2. Brief introduction
HT8000 Series high voltage isolating probe applies differential input
mode. It is used at the location need to measure high voltage or isolate
from ground usually.
HT8000 Series high voltage isolating probe supplies two attenuation
ranges 1/50 and 1/500 to be selected. The Maximum measurable
differential voltage are 130V (DC + peak AC) and 1300V (DC + peak
AC) accordingly.
HT8000 Series high voltage isolating probe has over range alarm
function. It indicates with a red LED.
HT8000 Series high voltage isolating probe is small and robust. It has
very high stability, reliability and accuracy.
It may be used at the following location usually:
Measure without connect to ground
Measure a high voltage or strong electricity
Switch-mode power supplies design
Power convert design
AC inverter and UPS
Transducer design
Electronic ballast design
Electromotor drive design
CRT display design
Electric and electronic experiment
To Next Page
Loading...
Need help?
General
