Harbor Breeze 0807431 - Initial Installation; Power Disconnection and Mounting Type

7
INITIAL INSTALLATION
1. Turn off the circuit breakers and the wall switch to the
fan supply line leads.
DANGER: Failure to disconnect the power
supply prior to installation may result in serious injury
or death.
2. This fan is intended for Flushmount installations.
Standard Mounting, Angled Mounting and Closemount
installations are not available.
2
Standard Mounting
Flushmount Closemount
Angle Mounting
3. Ensure the blades (H) will be at least 30 in. from
anyobstructionsandatleast7ft.abovetheoor.
H
3
7 ft. Min
30 in. Min
1