Harbor Breeze WAVEPORT Series User Manual

5
PREPARATION
Wire
Connector
Qty. 4
AA
BB
HARDWARE CONTENTS (shown actual size)
Blade
Screw
Qty. 15
+ 1 extra
CC
Rubber
Blade
Washer
Qty. 15
+ 1 extra
Before beginning assembly of product, make sure all parts are present. Place motor on carpet or on
foam to avoid damage to finish. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to install, operate or assemble the product.
Estimated Assembly Time: 120 minutes
Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety
Glasses, Stepladder and Wire Strippers
Helpful Tools (not included): AC Tester Light, Tape Measure, Do-It-Yourself Wiring Handbook and
Wire Cutters
Turn off circuit breakers and wall switch to the fan
supply line leads.
DANGER: Failure to disconnect power supply
prior to installation may result in serious injury or
death.
1.
INITIAL INSTALLATION
ON
OFF
ON
OFF
1

Harbor Breeze WAVEPORT Series Specifications

General

Blade Material	ABS
Number of Blades	3
Motor Type	AC
Control Type	Remote Control
Damp/Wet Rating	Damp
Blade Span	52 inches
Number of Speeds	3
Mounting Options	Flush Mount
Reversible Motor	Yes
Warranty	Limited Lifetime