1. 5/32” Allen Wrench 2. 3/16” Allen Wrench
3. #2 Phillips Screwdriver 4. 7/16 Wrench
HARDWARE IDENTIFICATION
Note: If the crib or bed does not have a bumper system, the under crib shelf will
attach in a diff erent manner. Please contact us for instructions in that situation.
Suggested Tools:
#60242 x 6
1/4 - 20 x 7/8 button socket cap screw
#60245 x 6
1/4 - 20 connector nut
#63413 x 4
Jam Nylon Locknut
#63443 x 4
Washer 1/4
#63392 x 4
Screw 1/4-20x5/8
Bumper Assembly- Part numbers vary based on crib
size. Consult parts list for the correct part#.
REPLACING OR INSTALLING AN UNDER CRIB SHELF
OR BUMPER SYSTEM
To Next Page
Loading...