STAFF CONTROL INSTRUCTIONS
Plug in the power cord to the wall outlet .
To raise or lower the head section to desired position press
the touch pad button “HEAD”, “UP” or “DOWN”.
To raise or lower the crib spring to desired position press
the touch pad button “CRIB”, “UP” or “DOWN”.
To raise or lower the foot section to desired position press
the touch pad button “FOOT”, “UP” or “DOWN”.
To use Trendelenberg or Reverse Trendelenberg, spring
should be fl at. Then press the touch pad for desired position.
CAUTION! DO NOT USE HEAD OR FOOT CONTROLS IN TRENDELENBERG MODE.
PLEASE NOTE THE MATTRESS PLATFORM SHOULD BE IN THE
LOWEST POSITION TO PERFORM CPR.
To Next Page
Loading...