Hardi EZ-Guide Plus - Page 20

EZ-Guide® Plus
Low accuracy warning
T
here are three states for a low accuracy warning:
State Definition
High accuracy only Uses only high accuracy positions for guidance. When low accuracy positions are received,
guidance is suspended. The lightbar displays a warning.
Warn low accuracy When low accuracy positions are received, guidance continues normally.
The lightbar displays a warning.
No warning When low accuracy positions are received, guidance continues normally. There is no warning.
Audible warning
If you have a remote control or an alarm connected to the EZ-Guide system, it can emit an audible warning. To enable t
h
audible warning, use the Audible Warning configuration screen.
20