PA 4000 Multiroom/Multichannel Power Amplifier
This remarkably flexible power amplifier combines four bridgeable 45-watt amplifier pairs (a total of eight channels) with two sepa-
rate inputs to allow simultaneous home theater and multizone use. For example, bridge two amplifier pairs and use them for the rear
surround channels of a 7.1 surround system, while a second input from a multizone system feeds two separate rooms with 2 x 45
watts of high-current, wide-bandwidth power. Music Sense turn-on or a low-voltage trigger may be used for automatic operation
with any system, and independent volume controls allow you to set a different level at each speaker location. For the ultimate in
control, pair the PA 4000 with Harman Kardon’s KP 1 keypad for complete power on/off and volume control from a remote room,
and add an optional IR sensor so that the PA 4000 can truly serve as the audio amplification and multizone hub of your home’s
complete audio/video system.
PA 2000
Multiroom/Multichannel Power Amplifier
Designed to power loudspeakers in other parts of
your house – or to add extra home cinema channels
for 7.1 surround, the PA 2000 delivers 4 x 45 watts
or 2 x 100 watts. Special circuitry maintains signal
integrity over long cabling distances, so you can enjoy
high fidelity anywhere in your home. Fanless cooling
for ultraquiet operation and automatic, music-sensing
power on/off are featured, too.
Extending the passion...multiroom enhancements. Thanks to
Harman Kardon, high-quality audio is no longer limited to a single room in the house, and you don’t need a complex room full
of gear to enjoy music throughout a home. Harman Kardon AVR and DPR receivers (except AVR 125 and AVR 225) include a
complete multizone system that feeds a separate input source to a second zone, a standard Zone II remote, and complete
18
To Next Page
Loading...
Need help?
General
