Harman Kardon AVR 1565 Quick Start Guide

4
AVR 1565/AVR 1566
Connections
Connect Your Audio and Video Source Devices
Source devices are components where a playback signal originates, e.g., a Blu-ray
Disc
™
or DVD player; a cable, satellite or HDTV tuner; etc. Your AVR has several different
types of input connectors for your audio and video source devices: HDMI, component
video, composite video, optical digital audio, coaxial digital audio and analog audio. The
connectors are labeled for the types of source devices you are most likely to connect.
Each of your AVR’s various source buttons is assigned to an analog audio input connector
(listed in the “AVR Source Button/Analog Audio Connector” column of the table below). To
provide you flexibility for connecting and configuring your system, we have designed the
AVR so that you can assign the digital audio inputs and component video input to any of
the video AVR sources.
As you connect your source components, fill out the “Source Device Connected” column
in the following table – it will make it easier for you to assign the digital audio input
connectors and component video connector later in the setup process.
Input Connections and Source Buttons
HDMI Devices
If any of your source devices have HDMI connectors, using those connectors will provide
the best possible video and audio performance quality. Since the HDMI cable carries
both digital video and digital audio signals, you do not have to make any additional audio
connections for devices you connect via HDMI cables, although you can assign one of the
digital audio connectors to one of the HDMI inputs.
AVR HDMI Connectors
HDMI-Equipped
Source Device
HDMI Cable
(not supplied)
To HDMI
Output
Component Video Device
If your Blu-ray Disc or DVD player does not have an HDMI connector but does have a
component video connector, using the component video connector will provide superior
video performance. You will also need to make an audio connection from the player to
the AVR.
AVR DVD Component
Video Connectors
Component Video-Equipped
Blu-ray Disc or DVD Player
Component Video
Cable (not supplied)
To Component Video
Outputs

Harman Kardon AVR 1565 Specifications

General

Impedance	75 Ω
Receiver type	-
Frequency range	10 - 130000 Hz
Audio output channels	- channels
Signal-to-Noise Ratio (SNR)	45 dB
Power output per channel (1KHz@8 Ohm)	70 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	3
Number of HDMI outputs	1
Ethernet LAN	No
AM band range	520 - 1720 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
3D	Yes
Analog signal format system	NTSC
HDMI version	1.4a
Product color	Black, Grey
Volume control	Rotary

Weight and Dimensions

Depth	435 mm
Width	440 mm
Height	165 mm
Weight	4127 g