REMOTE CONTROL FUNCTIONS
Direct
: Press this button before using the Numeric Keys to directly enter a
radio station frequency.
Clear
: Press this button to clear a radio station frequency you have started
to enter.
Preset Stations Selector
: Press these buttons to select a preset radio
station.
Tone Mode
: Press this button to access the tone controls (bass and treble).
Use the Navigation Buttons to make your selections.
RDS
: Activates RDS functions for FM Radio
Macros
: These buttons may be programmed to execute long command
sequences with a single button press. They are useful for programming the
command to turn on or off all of your components, or for accessing specialized
functions for a different component than you are currently operating.
Night Mode
: Press this button to activate Night mode with specially
encoded Dolby Digital discs or broadcasts. Night mode compresses the audio
so that louder passages are reduced in volume to avoid disturbing others,
while dialogue remains intelligible.
Track Skip
: These buttons have no effect on the receiver, but are used with
many source components to change tracks or chapters.
Dim
: Press this button to partially or fully dim the front-panel display.
Transport Controls
: These buttons have no effect on the receiver, but
are used to control many source components. By default, when the remote is
operating the receiver, these buttons will control a Harman Kardon Blu-ray
Disc player or a DVD player.
Instructions for users on removal and
disposal of used batteries.
Specification of included battery types.
These symbols shown on the product, the packaging or in the manual or
separate information sheet mean that the product itself, as well as the
batteries included or built into the product, should never be thrown away
with general household waste. Take them to suitable collection points, where
proper treatment, recycling and recovery take place, in accordance with
national or local legislation, or European Directives 2002/96/EC and 2006/66/
EC.
Correct handling of the product and batteries to be disposed of helps to
save resources and prevents possible negative effects on the environment or
human health.
The batteries included with your equipment may be Alkaline, Carbon Zinc/
Manganese or Lithium (button cells) type. All types should be disposed of
according to the above instructions.
To remove the batteries from your equipment or remote control, reverse the
procedure described for inserting batteries in the Owners Manual.
For products with a built-in battery that lasts for the lifetime of the product,
removal may not be possible for the user. In this case, recycling or recovery
centers handle the dismantling of the product and the removal of the
battery. If, for any reason, it becomes necessary to replace such a battery, this
procedure must be performed by authorized service centers.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
