Name: Harman Kardon AVR 3700
Brand: Harman Kardon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

ENGLISH

AVR

Making Connections

CAUTION: Before making any connections to the audio/video receiver, ensure

that the AVR’s AC cord is unplugged from the receiver and the AC outlet.

Making connections with the receiver plugged in and turned on could damage

the speakers.

Connect Your Speakers

After you have placed your loudspeakers in the room as explained in Place Your Speakers,

on page 13, connect each speaker to its color-coded terminal on the AVR as explained

in Speaker Connections, on page 14. Connect the speakers as shown in the illustration.

Connect Surround Back L/R Speakers

-OR- Front Height L/R Speakers Here

FHL

SBL

FHR

SBR

NOTE: If you installed front height speakers, connect them as shown for the SBL and

SBR speakers.

Connect Your Subwoofer

Use a single RCA audio cable to connect the AVR’s Subwoofer connector to your subwoofer

as explained in Subwoofer Connections, on page 14. NOTE: The AVR 3700 and AVR 370

provide connections for two subwoofers. See Manual Speaker Setup: Number of Speakers,

on page XX, for information about activating the two subwoofer outputs. Consult your

subwoofer’s user manual for speciﬁc information about making connections to it.

Single

RCA Audio

Cable

(not

supplied)

Use either

connector

Powered

Subwoofer

AVR 3700/

AVR 370/AVR 370C

AVR 2700/

AVR 270/

AVR 270C

Connect Your TV or Video Display

If your TV has an HDMI connector: Use an HDMI cable (not included) to connect it to the

AVR’s HDMI Monitor Out connector. The AVR 3700 and AVR 370 provide HDMI connections

for two TVs. You do not need to make any other connections to your TV from the receiver

or from any of your video source components.

HDMI Cable

(not supplied)

Use either

connector

AVR 2700/

AVR 270/

AVR 270C

AVR 3700/

AVR 370/AVR 370C

If your TV does not have an HDMI connector: Use a composite video cable (not

included) to connect the AVR’s Composite Monitor Out connector to your TV’s composite

video connector.

AVR

Composite

Monitor Out

Connector

Composite Video Cable

(not supplied)

NOTE: The HDMI connection to your TV is preferred. If you use the composite video

connection to your TV, you will not be able to view the AVR’s on-screen menus.

Other manuals for Harman Kardon AVR 3700

Quick Start Guide10 pages

Manual2 pages

Questions and Answers:

Need help?

Do you have a question about the Harman Kardon AVR 3700 and is the answer not in the manual?

Harman Kardon AVR 3700 Specifications

Audio Specifications

stereo mode continuous average power	125 watts/ch, 20Hz – 20kHz, <0.07% THD, both channels driven @ 8 ohms, 6-ohm certified
multichannel power	125 watts/ch, 20Hz – 20kHz, <0.07% THD, two channels driven @ 8 ohms, 6-ohm certified
input sensitivity/impedance (line-in)	200mV/47k ohms

Video Specifications