8FRONT-PANEL INFORMATION DISPLAY
FRONT-PANEL INFORMATION DISPLAY
remaining before the AVR 125 goes into the Standby
mode. (See page 21 for more information.)
O
Memory Indicator: This indicator flashes when
entering presets and other information into the tuner’s
memory.
P Stereo Indicator: This indicator lights when an FM
station is being tuned in stereo.
Q
Tuned Indicator:
This indicator lights when a station
is being received with sufficient signal strength to pro-
vide acceptable listening quality.
R Auto Indicator: This indicator lights when the
tuner’s Auto mode is in use.
S Analog Input Indicator: This indicator lights when
an analog input source has been selected.
T Coaxial Digital Input Indicators: These indicators
light to show when a Coaxial Digital Input has been
selected.
U Optical Digital Input Indicators: These indicators
light to show when an Optical Digital Input has been
selected.
NOTE: See page 23 for information on assigning either
an analog input or one of the digital inputs to the
source currently in use.
To Next Page
Loading...
Need help?
General
