Front Panel Information Display
A Mute: This indicator illuminates
to remind you that the AVR35RDS’s
output has been silenced by press-
ing the Mute button Û `. Press
the Mute button again to return to the
previously selected output level.
B Bypass: This indicator illumi-
nates when the surround processing
has been disabled by pressing the
Surround Off button Ú. When this
indicator is lit, the AVR35RDS will
play traditional stereo sound using
the front left and front right speakers
only.
C Analog: This indicator illuminates
when an analog input source is in use.
D Dolby Digital Indicator: This
indicator illuminates when a Dolby
Digital source is being played.
E Optical Source: This indicator
illuminates when a digital source
is in use via a connection to the
Optical Digital input ‡.
F Analog Dolby Surround Mode
Indicators: These indicators illumi-
nate when one of the analog (matrix)
Dolby Surround modes is in use.
G Coax Source: This indicator illu-
minates when a digital source is in
use via a connection to the Coaxial
Digital input fl.
H AC-3* Indicator: This indicator
illuminates when the AVR35RDS is
decoding a Dolby Digital input source.
I PCM Indicator: This indicator
illuminates to show that a standard
PCM (SP/DIF) digital audio signal
is being decoded by the digital-to-
analog converter.
J Analog Surround Mode
Indicators: These indicators illumi-
nate when one of the DSP generated
analog surround modes is in use
with an analog input source.
K Night Indicator: This indicator
lights when the AVR35RDS is in the
Night mode, which prevents the
AVR35RDS from loud playback
when digital sources are in use.
L Preset Number: This two-digit
display indicates the station preset
number that is currently in use, or
that is being entered.
M Preset Indicator: This indicator
illuminates when one of the stations
entered into the preset memory is
tuned. The number that appears
below the indicator is the preset
station’s memory.
N Memory: This indicator flashes
when entering presets and other
information into the tuner’s memory.
O Auto: This indicator illuminates
when the “Auto” mode is in use for
FM tuning.
P Stereo Indicator: This indicator
illuminates when an FM station is
being tuned in stereo.
Q Mono Indicator: This indicator
illuminates when the tuner has been
placed in the monaural mode by
pressing the Tuner button r. Set
the tuner for mono listening to
cut noise and improve the quality of
distant stereo signals.
R Tuned Indicator: This indicator
illuminates when a station is being
received with sufficient signal
strength to allow for acceptable
listening quality.
S RT Indicator: This indicator illu-
minates when the Main Information
Display V is showing an RDS text
message.
T CT Indicator: This indicator illu-
minates when the Main Information
Display V is showing the current
time of day as transmitted by an
RDS broadcast.
U PTY Indicator: This indicator illu-
minates when the currently tuned
station’s PTY data is being displayed,
or during a PTY search.
V Main Information Display: This
display shows messages relating to
the status, input source, surround
mode, tuner, volume level or other
aspects of unit’s operation.
W RDS Indicator: This indicator
illuminates when an FM station is
transmitting RDS data.
X Sleep Indicator: This indicator
is illuminated when the Sleep func-
tion is in use. The number that
appears above the indicator is the
number of minutes remaining before
the AVR35RDS will return to the
Standby mode.
8
AVR35RDS 230 volt Rev (C) 9/28/98
To Next Page
Loading...
Need help?
General
