4
Unpack the Go + Play system.
Place the appropriate iPod adapter and docking adapter (for iPod nano and iPod mini) into the docking station.
IMPORTANT: Turn the adjustable iPod knob in the center of the docking station to match your specific iPod model.
Place the iPod into the docking station.
Connect the power supply into the DC in jack (#1).
Plug adapter into wall outlet.
If using batteries is preferred, install eight (8) type D batteries into the bottom of the unit.
1.
2.
3.
4.
5.
6.
7.
general setup of your go + play
Press the power button located on top of the Go + Play to turn the unit on.
Select and play music through your iPod controls or send commands to your iPod with the Harman Kardon Smart Remote. (Refer to the
Harman Kardon Smart Remote User Guide for more information.)
Adjust volume using the “+” and “–” volume buttons located on top of the unit or on the Harman Kardon Smart Remote.
1.
2.
3.
Listening to Music From an iPod
Connect the auxiliary device into the auxiliary-in jack (#4) using the supplied 3.5mm auxiliary cable.
Press the power button located on top of the Go + Play to turn the unit on.
Control music playback through your device.
Adjust volume using the “+” and “–” volume buttons located on top of the unit or on the Harman Kardon Smart Remote.
1.
2.
3.
4.
Listening to Music From an Auxiliary Device
Connect one end of an S-video cable (sold separately) to the S-video jack (#3) on the back of the unit.
Connect the other end of the S-video cable to your TV/monitor.
Set your TV/monitor to the appropriate input.
Set your iPod to display photos or videos through “TV Out.” (Refer to your iPod manual for more information.)
Control photo or video playback through your iPod controls or send commands to your iPod with the Harman Kardon Smart Remote.
Adjust the volume of your video or background music while viewing photos using the “+” and “–” volume buttons located in front of the unit
or on the Harman Kardon Smart Remote.
1.
2.
3.
4.
5.
6.
Viewing Photos or Videos on a TV/Monitor (Optional)
Connect a USB cable into the USB jack (#2) on the back of the unit and connect the other end of the USB cable directly to your computer’s USB port.1.
Syncing and Transferring Files With Your Computer
Make sure your iPod is securely docked into the Go + Play using the correct adapters.
Make sure the Go + Play is connected to a live electrical outlet.
Note: The Go + Play will not charge other devices.
1.
2.
Charging Your iPod
Remote will work only with compatible iPods.
Please refer to your Harman Kardon Smart Remote User Guide for more information.
Remote Functionality
The Go + Play is equipped with a storage compartment on the back of the unit. Simply press the
compartment to open it and store your remote.
Storing Your Harman Kardon Smart Remote
DC In
USB S-Video Out Auxilary In
Docking Adaptors
Mini
Nano
To Next Page
Loading...
