Harman CITATION TOWER User Manual

13
/ SPEAKER SETUP
Operate as Standalone Stereo Speakers
1) Press “MUSIC” on the touch screen of the primary speaker
to enter stereo mode. Your CITATION TOWER is required to
connect Wi-Fi with the Google Home app.
2) Download the Google Home app on your smartphone or
tablet.
Google Home
Google Home
3) Run the Google Home app and set up your CITATION
TOWER as instructed in the app. Always follow the
instructions in the app to complete the Wi-Fi setup.
4) Sign in with your Google account. If you do not have, create
a new one.
NOTES:
• If you encounter any setup issues, make sure to enable Bluetooth
and location services on your smartphone or tablet.
• In the Google Home app, you can rename this product. The
device name will remain during Bluetooth device discovery and
Chromecast streaming.
• Once this product is connected to the Internet, it will receive a
periodic over-the-air software update to improve performance.
This update may take a few minutes to complete.

Harman CITATION TOWER Specifications

General

Power Output	200W RMS
Voice Assistant	Google Assistant
Signal-to-noise ratio	>80dB
Bluetooth version	4.2
Bluetooth transmitter power	<10dBm
Bluetooth transmitter modulation	GFSK, π/4 DQPSK, 8DPSK
Wireless network	802.11 a/b/g/n/ac (2.4GHz/5GHz)
2.4G Wi-Fi transmitter power	<20dBm
5G Wi-Fi transmitter power	<23dBm
5G Wi-Fi modulation	OFDM
Audio formats	HE-AAC, LC-AAC, MP3, Vorbis, WAV (LPCM), FLAC, Opus
Connectivity	Wi-Fi, Bluetooth
Power Supply	100-240V ~ 50/60Hz
Bluetooth transmitter frequency range	2402MHz - 2480MHz
2.4G Wi-Fi transmitter frequency range	2412 – 2472MHz
2.4G Wi-Fi modulation	DSSS, OFDM
5G Wi-Fi transmitter frequency range	5.150 – 5.350GHz, 5.470 – 5.725GHz, 5.725 – 5.825GHz
Color Options	Black