Harman Martin ERA 600 Performance - Page 13

Control options 13
Standard RDM Parameter IDs
Manufacturer-specific RDM Parameter IDs
GET
allowed
SET
allowed RDM parameter IDs Notes
Network Management
DISC_UNIQUE_BRANCH
DISC_MUTE
DISC_UN_MUTE
Status Collection
 QUEUED_MESSAGE
 STATUS_MESSAGES
 STATUS_ID_DESCRIPTION
 CLEAR_STATUS_ID
RDM Information
 SUPPORTED_PARAMETERS
Product information
 DEVICE_INFO
 DEVICE_MODEL_DESCRIPTION
 MANUFACTURER_LABEL
DEVICE_LABEL
 SOFTWARE_VERSION_LABEL
 BOOT_SOFTWARE_VERSION_ID
 COMMS_STATUS
DMX Setup
DMX_PERSONALITY
 DMX_PERSONALITY_DESCRIPTION
DMX_START_ADDRESS
Sensors
 SENSOR_DEFINITION
 SENSOR_VALUE
Usage information
DEVICE_HOURS
Configuration
PAN_INVERT
TILT_INVERT
Control
IDENTIFY_DEVICE
 RESET_DEVICE
GET
allowed
SET
allowed RDM parameter ID’s (slot 21-22) Notes
Fixture behavior
 LAST_STATE (0XA004) Behavior if loss of DMX signal. Set to:
00 BLACKOUT
01 HOLD
 DIMMER_CURVE (0X0343) Set dimming curve to:
00 LINEAR
01 SQUARE LAW
02 INV SQ LAW
03 S-CURVE