28
ERA 600 Performance / Profile User Guide
Service and display messages
The ERA 600 Performance / Profile monitors its own performance and has a diagnostic error recognition
system that lets it display messages with information about any problem detected.
If the fixture has a status message to report, a red warning triangle appears in the bottom right of the control
panel display. If the red triangle is present, pressing the Enter button displays any active status messages.
Excessively high temperatures
If any of the temperature sensors reports that the fixture has exceeded its recommended temperature
range, the fixture reports a temperature warning and reduces light output to reduce its temperature. If the
temperature reaches a dangerous level, light output is shut down completely.
Temperature warnings are canceled and full light output becomes available again as soon as the
temperature returns to normal.
Status message list
The status messages that the fixture can display are listed in Table 4 below:
Code Notes
Animation 1 Animation wheel error
BaseFan Base cooling fan warning
BaseTemp Base temperature warning
Blade Framing module error
CoolFan1 LED cooling fan 1 warning
CoolFan2 LED cooling fan 2 warning
CoolFan3 LED cooling fan 3 warning
CoolFan4 LED cooling fan 4 warning
CoolFan5 Cooling fan 5 warning
CoolFan6 Cooling fan 6 warning
CMYFan1 CMY module cooling fan 1 error
CMYFan2 CMY module cooling fan 2 error
CPU1 CPU 1 (Display PCB) error
CPU2 CPU 2 (Pan/tilt control) error
CPU3 CPU 3 (CMY control) error
CPU4 CPU 4 (Gobo/color wheel control) error
CPU5 CPU 5 (Framing control) error
CPU6 CPU 6 (Zoom/focus control) error
CPU7 CPU 7 (Prism/frost control) error
CPU8 CPU 8 (LED control) error
CTO Color Temperature Control color flag error
Cyan Cyan color flag error
FixedGobo Fixed gobo wheel error
Focus Focus error
Frost1 Frost effect error
GoboFan Gobo wheel cooling fan warning
GoboRot Gobo rotation error
HeadFan1 Head cooling fan 1 error
Table 4: Status messages
To Next Page
Loading...
