16
ERA 600 Performance / Profile User Guide
ERA 600 Profile fixture type. It will adapt its DMX control functions to match the Gobo Wheel 3 module.
The FIXTURE TYPE readout lets you check which module is installed (or check that the fixture has
updated itself after you have carried out a conversion).
DMX signal monitoring
The DMX LIVE menu lets you scroll through all the fixture’s DMX channels and display the DMX values from
0 - 255 that are being received on each channel.
Manual control
The MANUAL CONTROL menu lets you reset the fixture and operate it without a DMX controller.
To execute commands in the MANUAL CONTROL menu, select the effect that you want to control, then
enter a value from 0 to 255 to apply a command. The menu items and values correspond to the commands
listed in the DMX protocol in this User Manual.
When you exit the MANUAL CONTROL menu, the fixture will keep its effect positions and settings until you
enter a new menu. When you do this, the fixture will revert to default positions and settings. The fixture will
also revert to default positions and settings if you exit and then re-enter MANUAL CONTROL.
Service
Servicing the fixture and the contents of the SERVICE menu are covered in the ERA 600 Performance /
Profile Safety and Installation Manual supplied with fixtures and available for download from the product
pages on the Martin website at www.martin.com.
To Next Page
Loading...
