User Manual
8.2: VCA GROUPS
MIX FEATURES > VCA GROUPS
8.2: MIX FEATURES > VCA GROUPS
CLR
Clear Selection.
While in VCA Group Setup mode, holding the CLR button and pressing a VCA Group Master button 1-8 will clear that
VCA Group.
ALT + CLR
Clear all.
While in VCA Group Setup mode, holding ALT + CLR and pressing a VCA Group Master Button 1-8 will clear all VCA
Groups.
ON
VCA Group / Mute status indication.
Red illuminated ON buttons indicate a channel that has either been muted by a VCA Master or a Mute Group Master.
Green ON buttons indicate an active, un-muted channel, and an unlit ON button indicates an inactive channel, muted
via the ON button.
VCA Master Fader
Offset the level of VCA Group Member Channels.
The VCA Master Faders, by default, are allocated to Fader Layer C. They can be assigned to another other Control
Channel via the FADER LAYERS menu (see section 3.1).
A VCA Master osets the level of all members of the VCA Group. The Member faders will not move.
To Next Page
Loading...
