Harmony DREAMTIME 2 - Securing Child and Booster Seat in Vehicle

22
1. Place booster seat rmly against the back of a
forward-facing vehicle seat. The vehicle seat 
be equipped with a 3-point lap-and-shoulder belt.
2. Place child in the booster seat with child’s back at
against the back of the booster seat.
3. Adjust headrest height so that the boom of the
headrest is even with the top of the child’s shoulders.
4. Thread shoulder belt poron of
the 3-point lap-and-shoulder belt
system through the shoulder
belt guide ❶ and ensure that
shoulder belt lies across child’s
shoulder and chest, and 
across child’s face or neck.
5. Thread both sides of the lap belt and the lower end
of the shoulder belt of the 3-point lap-and-shoulder
belt system  booster seat armrests ❷,
and ensure that the belt is snug across child’s hips just
touching their thighs and is  across their stomach.
 posion vehicle belt over top of the armrests ❻.
The vehicle seat headrest should not create a gap
between vehicle seat and booster seat ❼. If so,
remove the vehicle headrest.
❶
❷


❻
❼
❺