Harmony DREAMTIME 2 - Removing;Installing Fabric Seat Cover; Using Cup Holder (When Applicable)

26
: Unhook the le and
right ELASTIC loops from each
shoulder belt guide ❶.
:
• Unhook the le and right ELASTIC
loops from their respecve
buons ❷.
• Unhook le and right ELASTIC
loops from each of the T-shaped
extensions at the base of the
backrest ❸.
 Detach hook and loop tab from back of seat.

To reinstall fabric pads, repeat previous steps in reverse
order.

❶
❶
❷
❷
❸
❸
The cup holder is stored in the base of
the booster seat.
• To remove from storage, pull the cup
holder.
:
1. Remove protecve cap from the
desired side by liing release tab on
protecve cap and pulling cap o ❶.
Store protecve cap for future use.
2. Slide cup holder into place over cup
holder clip ❷ unl locked in place.
:
1. Li release tab on cup holder and pull cup holder o
cup holder clip. Replace protecve cap if desired.

❶
❷