24
4. Buckle vehicle seat belt into place. Ensure the buckle
is secure by gently pulling on it.
. If the belt does not lie
properly across the child’s shoulder and chest, the
shoulder belt guide clip be used to ensure
proper placement (see “Using shoulder belt guide”,
pg. 25).
: To avoid possible entanglement
and choking with your vehicle’s shoulder belts,
Harmony Juvenile Products recommends that the
following precauons are taken when installing your
booster seat:
1. Pull the shoulder poron of the vehicle seat belt all
the way out unl the retractor locks.
2 let the seat belt retract unl it is snug against
your child.
3. that the seat belts do not press on the
child’s esh or push the child’s body into an unnatural
posion.
4. Do the same for all unused vehicle seat belts.
Teach your child that seat belts are not toys and should
be played with, regardless of whether the car is
in moon or not.
be aware of what your children are doing in
the back seat.