23
6. Buckle vehicle seat belt into place. Ensure the buckle
is secure by gently pulling on it.
See “Assembling/Disassembling back support” (pg. 16)
for instrucons for removing the backrest.
1. Place the booster seat rmly against the back of a
forward-facing vehicle seat in a posion equipped
with a vehicle lap-and-shoulder belt and headrest.
2. Have your child sit on the booster car seat with their
back at against the vehicle seat.
3. Thread both sides of the lap
belt and the lower end of the
shoulder belt of the 3-point lap-
and-shoulder belt system
booster seat armrests, and
ensure that the belt is snug across
child’s hips just touching their
thighs and is across their
stomach.
!
Once the lap and shoulder porons of the seat belt
are properly posioned and the buckle is aached,
To Next Page
Loading...
