27
:
• using cold water -
delicate cycle.
• .
• to prevent cover from shrinking.
:
• using warm water and mild soap.
• .
• use solvents, abrasive cleaners, or
disassemble booster seat in any way, except as
instructed.
This booster seat is cered for aircra use.
Aircra seats are not equipped with 3-point lap-and-
shoulder belts which are required for use with this
booster seat.
We recommend that you store your
instrucon manual in the pocket provided
on the side of the booster seat.
This booster seat was manufactured by
(HJP). HJP warrants this product to
the original retail purchaser as follows:
This booster seat is warranted against defecve
materials and workmanship for one (1) year from the
To Next Page
Loading...
