9 EC declaration of conformity
In the meaning of the EC Machine Directive 2006/42/EG
We hereby declare that the design of the machine specified below conforms with basic safety
and health requirements of the listed EC directives.
This certificate is no longer valid in the event of modifications being made to the machine which
are not approved by us.
Name of the manufacturer
: Harnisch+Rieth
Address of the manufacturer
: Küferstraße 14-16, 73650 Winterbach
Machine designation
: Automatic blasting unit
Machine type
: D-G 16 S2
The following pertinent EC directives were applied:
EC Machine Directive 2006/42/EG (29.12.2009)
EC Machine Directive 2006/95/EG (29.12.2007)
EMV Directive 2004/108/EC (20.07.2007)
The following harmonizing standards were applied:
T
h
e
following national technical specifications were applied:
DIN EN 60335
: Device for collecting dust which poses a health risk and reintroducing fresh
air into workrooms.
Technical documentation is available.
The operation instructions relating to the machine are also available.
Director of the Quality Control Department
Winterbach, 4 January 2010
DIN EN ISO 12100
Safety of Machinery—Part 1, General Principles of Design (04.2004)
DIN EN ISO 14121-1
Safety of Machinery – Principles of Risk Assessment (12.2007)
DIN EN 61,010-1
Safety regulations for measuring, control, regulating, and laboratory devices
DIN EN 60204-1
Safety of machinery - Electrical equipment of machines (06.2007)
DIN EN 61326-1
Electrical equipment for measurement, control and laboratory use –
DIN EN 61000-6-3
Radio-Suppression of Electrical Equipment –
Radio Interference Voltage / Radio Interference
Power (09.2007)
DIN EN 55 014-2
Electromagnetic Compatibility Noise Immunity, ESD, / Burst, / Surge
(10.1997).
To Previous Page