Figure 3A-1. DX 25 Front View, Controls and Indicators
REF. CONTROL/INDICATOR FUNCTION
1 LOAD Control Control for matching load to 50 Ohm transmitter impedance.
2 TUNE Control Control for matching load to 50 Ohm transmitter impedance.
3 Switch Board/
Meter Panel
See Table 3A-2 and Figure 3A-2.
4 ColorStat™ Panel See Table 3A-3 and Figure 3A-3.
5 Driver Control Compartment
6 Center Control Compartment
7 Left Control Compartment
8 Output Network Compartment
Table 3A-1. DX 25U Transmitter, Controls and Indicators
Section IIIA
Controls and Indicators
Rev AA: 8/9/2000 888-2297-002 3A-1
WARNING: Disconnect primary power prior to servicing.
To Next Page
Loading...
