3-12 888-2587-001 4/18/11
WARNING: Disconnect primary power prior to servicing.
FM HD Radio System
Section 3 Operation
3.6.5 Boost Pro Response
3.6.5.1 FAULT LED Illuminated
The Boost Pro front panel LED will turn red if a fault condition is detected. Press INFO,
then FAULT SUBMENU to view a listing of statuses where the malfunction would be
indicated by the word FAULT. Refer to "6.2.1 Boost Pro Fault Indication" on page 6-2.
To reset the fault, press INFO, then CONTROL SUBMENU, move cursor to point to
RESET FAULT. Press ENTER to clear the fault status. If the fault indication is still
present, the condition causing the malfuntion will need to be identified and corrected.
To Next Page
Loading...
