5-32 888-2629-200 10/6/10
WARNING: Disconnect primary power prior to servicing.
Section 5 Maintenance and Alignments
Maxiva ULX COFDM Series
Figure 5-20 Upper Combiner Output Clamp
STEP 13 Once the clamps on the combiner outputs are loose the hybrid
coupler and coaxial assembly can be supported and then pulled
away from the module combiners. The hybrid combiner/coaxial RF
system can then be removed from the cabinet and stored in a safe
location. The hybrid combiner/coaxial output assembly is shown in
Figure 5-21 on page 5-32. The cabinet with the RF system removed is
shown in Figure 5-22 on page 5-33.
Figure 5-21 Hybrid Combiner/Coaxial RF System
Clamp
To Next Page
Loading...
