Harris Platinum Series - Page 39

POWER SUPPLY INFORMATION
ALARM
NEXT VISUAL AURAL LINE EXIT
Supply 1 Supply 2
AURAL A
PA
PA
A
B
50.3 V 157 A
50.2 V 237 A
50.5 V 234 A
50.3 V 131 A
50.0 V 226 A
50.1 V 217 A
Figure 3-7. Power Supply Information Screen #1
Power Supply Information Screen 1 - This is the first screen
displayed when the SUPPLY key is selected while viewing any
visual or information meter screen. This screen displays the
Power Supply information for each cabinet showing the current
& voltage output for each supply.
There are 5 active softkeys on this screen. They are:
NEXT - This key will display the 2nd power supply information
screen.
VISUAL - This key will display the Visual information screen 1.
AURAL - This key displays the aural information in the system.
LINE - This key will displaythe line voltages of the 3 phase input
power.
EXIT- This keywill returntheuser to the BargraphMeter screen.
POWER SUPPLY INFORMATION
ALARM
PREV VISUAL AURAL LINE EXIT
Main Logic Supply Voltages:
(+5)
(+12)
(-12)
(UNREG)
MAIN BATT
MON BATT
+5.19
+12.0
-12.1
+1.3
+4.35
+4.18
Figure 3-8. Power Supply Information Screen #2
Power Supply Screen 2 - This screen is displayed when the
NEXT key is selected on the Power Supply information first
screen. This screen displays the +5, +12, -12, UNREG, and
battery voltages for the monitor system.
There are 5 active softkeys on this screen. They are:
PREV - This key will display the 1st power supply information
screen.
VISUAL - This key will display the Visual information screen 1.
AURAL - This key displays the aural information in the system.
LINE - This key will displaythe line voltages of the 3 phase input
power.
EXIT- This keywill returntheuser to the BargraphMeter screen.
Section III - Operation, Controls, and Indicators
Rev. B: 1/11/1999 888-2365-001 3-7
WARNING: Disconnect primary power prior to servicing.