1-9
RF-7800W
GENERAL INFORMATION
• The Tx Power must be reduced in order to achieve Equivalent Isotropically Radiated Power (EIRP)
limits. Refer to Paragraph 6.4.
g. 5.250-5.350 GHz band (U-NII-2A: Part 15.401-Part 15.407)
• Use of Dynamic Frequency Selection (DFS) is required. Refer to Paragraph 3.8.9.1.
• In order to ensure that the radio remains on designated frequencies, e.g. due to a DFS-induced
frequency change, Frequency Ranges must be defined. Refer to Paragraph 3.8.4.4. Refer to
Table 1-5, FCC 5.250-5.350 GHz Band RF Frequencies for example Frequency Ranges.
• The Tx Power must be reduced in order to achieve Equivalent Isotropically Radiated Power (EIRP)
limits. Refer to Paragraph 6.4.
h. 5.470-5.725 GHz band (U-NII-2C: Part 15.401-Part 15.407)
• Use of Dynamic Frequency Selection (DFS) is required. Refer to Paragraph 3.8.9.1.
• In order to ensure that the radio remains on designated frequencies, e.g. due to a DFS-induced
frequency change, Frequency Ranges must be defined. Refer to Paragraph 3.8.4.4. Refer to
Table 1-6, FCC 5.470-5.725 GHz Band RF Frequencies for example Frequency Ranges.
• The Tx Power must be reduced in order to achieve Equivalent Isotropically Radiated Power (EIRP)
limits. Refer to Paragraph 6.4.
Table 1-4. FCC 5.150-5.250 GHz Band RF Frequencies
Channel
Width (MHz)
RF Frequency (MHz) Frequency Range (MHz)
Min Max Begin End
5 5170 5242.5 5167.5 5245
10 5170 5240.5 5165 5245.5
20 5170 5235.5 5160 5245.5
40 5170 5230 5150 5250
Table 1-5. FCC 5.250-5.350 GHz Band RF Frequencies
Channel
Width (MHz)
RF Frequency (MHz) Frequency Range (MHz)
Min Max Begin End
5 5252.5 5330 5250 5332.5
10 5255 5330 5250 5335
20 5260 5330 5250 5340
40 5270 5328 5250 5348
Table 1-6. FCC 5.470-5.725 GHz Band RF Frequencies
Channel
Width (MHz)
RF Frequency (MHz) Frequency Range (MHz)
Min Max Begin End
5 5490 5700 5487.5 5702.5
10 5490 5700 5485 5705