3-24
RF-7800W
SYSTEM ADMINISTRATION AND CONFIGURATION
3.9.2.5 Subscriber IP
Once the SS radio has successfully linked up with the SC, the SS radio's IP address is made available in the link
details as a convenient way to quickly log into the radio's management GUI.
3.9.2.6 Modulation and Coding Rates
Modulation and Coding rate settings are described below.
3.9.2.7 Adaptive Modulation
In order to handle dynamic link conditions, Adaptive Modulation should be employed. The radio monitors the bit-
error rate of data that is received over the link and dynamically controls both the downlink and uplink burst rates in
order to minimize bit errors and prevent links from dropping altogether.
To Next Page
Loading...
