Harris Unity XG-100P - Zeroize All from Kvl 3000 Plus

57
XG-100
ADVANCED OPERATIONS
4
ZEROIZE ALL FROM KVL 3000 PLUS
Refer to the KVL 3000 Plus User's Guide for advanced programming and setup
instructions.
1. Power on KVL 3000 Plus.
2. Connect KVL 3000 Plus to
side connector using a
12082-0400-A1 cable.
This appears on radio. All AES
and DES keys are zeroized
regardless of selection.
At the KVL 3000 Plus:
3. Select TARGET.
4. Select ZERO.
5. Select ALL.
6. Select YES.
7. Verify that the KVL 3000
Plus screen displays
ZEROIZED
SUCCESSFULLY OK.
8. Select OK on the KVL 3000
Plus.
SIDE
CONNECTOR
Esc
Ctrl
Shift
BackPwr
1 2
3
A
4 5
6 B
7 8
9 C
G F
E D