2
MOVING PARTS
• Avoid moving parts when working on the unit.
• Do not wear loose clothing when working around
rotating components.
• Make sure all the nuts and bolts are secure.
• Keep power shields and guards in position.
• If adjustments must be made while the unit is
running, use extreme caution around rotating
and/or hot components.
HYDRAULIC FLUID UNDER PRESSURE
• Hydraulic fluid can penetrate the skin, which can
result in possible blood poisoning.
• Always shut down the primary engine driving the
hydraulic pump before loosening or tightening
any fittings.
CLEAN UNIT AND SURROUNDING AREA
• Keep the unit and surrounding area clean.
• Remove all accumulated grease and oil from the
unit. Do not store anything in the generator
compartment. Both can cause generator system
problems (overheating, noise, and vibration),
eventual generator damage, and/or potential fire
hazards.
To Next Page
Loading...