EasyManuals Logo

Hartmann Veroval DUO CONTROL User Manual

Hartmann Veroval DUO CONTROL
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
23
English
EN
The symbol only appears on the display if the Veroval duo control device
does not detect any notable body movement during the measurement, e.g.,
movement of the hand, arm or upper body. If the rest indicator symbol does
not appear, the measurements may have been affected by body movement.
Therefore, please follow the 10 golden rules (see Chapter 5.1) and repeat the
measurement.
The full display of ‘Measurement OK’ symbol only appears on the
display if the cuff is applied firmly enough and no notable body movement
was detected by the device during the measurement.
If the or symbols appear on the display, the ambient temperature during
the measurement was too high or too low, which can lead to abnormal blood
pressure values. In these cases, please note the 10 golden rules (see Chapter
5.1) and repeat the measurement under optimal temperature conditions.
In addition to the measured values, the time, the date, the associated
user memory or and the corresponding memory number
(e.g. [M] 05) are shown. The measured value is automatically assigned to the
displayed user memory. As long as the measurement is displayed, you can
allocate the values to the corresponding user memory by pressing the or
keys. If you do not assign them, the measured value is automatically stored in
the displayed user memory.
Using the results indicator on the left of the display, you can classify your
measurement (see the table in Chapter 3 ‘Blood pressure information’).
To switch the device off, press the START/STOP button ; otherwise, the
device will automatically switch off after 3 minutes.
The measurement will not be saved if the power supply is interrupted before
the device is switched off.
If you wish to stop the measurement for any reason, simply press the
START/STOP button . The cuff inflation or measurement is interrupted
and the pressure is automatically released.
If this symbol is shown at the bottom of the display, the unit has detected
an irregular heartbeat or arrhythmia. However, the measurement may also
have been disrupted by body movement or speaking. It is best to repeat the
measurement. If you see this symbol regularly when measuring your blood
pressure, we recommend that your doctor checks your heart rhythm.
IFU_Veroval_dc_SK2_0307661_EN_TR_AE_CN_200918.indd 23 17.10.18 18:03

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hartmann Veroval DUO CONTROL and is the answer not in the manual?

Hartmann Veroval DUO CONTROL Specifications

General IconGeneral
BrandHartmann
ModelVeroval DUO CONTROL
CategoryBlood Pressure Monitor
LanguageEnglish

Related product manuals