31
■ Switch the monitor off if an error message appears.
■ Check for all possible causes and follow the 10 golden rules (Chapter 5.1)
as well as the instructions for self-measurement from Chapter 2 ‘Important
information’.
■ Relax for 1 minute and then repeat the measurement.
9. Device care
■ Only ever use a soft, damp cloth to clean the monitor. Please do not use
thinners, alcohol, cleaning agents or solvents.
■ The cuff can be cleaned carefully using a slightly damp cloth and mild soap
solution. Do not completely immerse the cuff in water.
■ It is recommended to clean and disinfect the cuff regularly or after each use,
especially when used by several users, to prevent infection. The cuff should be
disinfected, particularly on the inside, by wiping with a disinfectant.
To disinfect the device and the cuff, 70% isopropyl alcohol solution (active
substance 2-propanol) can be used. Other specific disinfectants that are
suitable are listed on our website (Chapter 12).
■ To protect from external influences, you can store the device and the cuff
together with these instructions in the storage bag.
10. Accessories
■ To ensure measuring accuracy, only use original HARTMANN accessories
which may be obtained from your pharmacist or specialist medical supplier.
■ Accurate measured results cannot be guaranteed outside the upper-arm
circumference ranges specified here.
Standard cuff, medium, for upper arm circumference of 22– 32 cm
Art. no. 925 531
Standard cuff, large, for upper arm circumference of 32– 42 cm
Art. no. 925 532
■ Mains power operation: on the rear of the device there is a socket for the
mains operation adapter (output 6 V DC/600 mA). Please only use the
Veroval
®
power supply unit (model no. 925 391). Otherwise, the function and
measuring accuracy of the monitor cannot be ensured.
IFU_Veroval_dc_SK2_0307661_EN_TR_AE_CN_200918.indd 31 17.10.18 18:04
To Next Page
Loading...
Need help?
General
