EasyManua.ls Logo

HASE LUNO - INSTALLERS INFORMATION; CODES; ITEMS REQUIRED FOR INSTALLATION; UNPACKING AND INSPECTION

HASE LUNO
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HearthStone Quality Home Heating Products, Inc. Luno Model #8160
INSTALLERS INFORMATION
CODES
Adhere to all local codes or, in their absence, the
latest edition of THE NATIONAL FUEL GAS CODE
ANSI Z223.1 (NFPA 54) or CAN/CGA B149.
Installation Code that can be obtained from:
AMERICAN NATIONAL STANDARDS INSTITUTE, INC.
1430 BROADWAY
NEW YORK, NY 10018
OR
NATIONAL FIRE PROTECTION ASSOCIATION, INC.
BATTERY MARCH PARK
QUINCY, MA 02269
A manufactured home (mobile) OEM installation must
conform to the Manufactured Home Construction and
Safety Standard, Title 24 CFR, Part 3280 (U.S.) or
Standard for Manufactured Home Installation,
ANSI/NCBCS A225.1 or Standard for Gas Equipped
Recreational Vehicles and mobile Housing, CSA
Z240.4.CAN/SCA Z240 MH (Canada). (Installer
l’appareil selon les codes ou règlements locaux, ou,
en l’absence de tels règlements, selon les Codes
d’installation CAN/CGA-B149.)
ITEMS REQUIRED FOR INSTALLATION
* External regulator
* Piping which complies with state and local codes
* Pipe sealant approved for use with fuel gas (resistant to
sulfur compounds)
* Manual shutoff valve
* Sediment trap (see page 14)
* T
ee joint
* Pipe wrench
* Phillips head screwdriver
* 7/16-inch wrench
* Other parts as required by state or local code
*Safety Glasses
*Gloves
PACKING LIST
1-Luno Gas-Fired Heater
1-Set of Decorative Fire logs
1-Bag Platinum Bright Embers
1-Decorative Top Stone
1-Owner’s Manual
1-Warranty Validation Form
2-Accessory box
1-Touch up paint
1-Venting/stove connector
1-Remote Control Receiver
1-Remote Control Thermostat
1-Mobile home bolt down kit
Note: Vent kits and components are supplied
separately. Failure to use the venting components
specified by Hearthstone QHHP, Inc. will void your
warranty and could result in inefficient or unsafe
operating conditions.
SPECIFIED VENTING MANUFACTURER CONTACT
INFORMATION
Simpson
www.duravent.com/
(800)8
35-4429
customerservice@duravent.com
American Metal Products
AmeriVent
www.americanmetalproducts.com/vent/amerivent.htm
1-80
0-423-4270
info@americanmetalproducts.com
Selkirk Corporation
http://www.selkirkinc.com/
1.800.9
92.VENT (8368)
sales@selkirkinc.com
custsvc@selkirkinc.com
Security Chimneys International Limited
Secure Vent
www.securitychimneys.com/pages/chimneys
UNPACKING AND INSPECTION
Unpack and Inspect for Damage -
The Luno is packaged to withstand shipment without
damage. However, damage can still occur during
transit; so take care to inspect for damage when
unpacking and installing the unit. If any damage or
missing parts are detected, immediately contact your
dealer. Do not install, or put into service, a
damaged or incomplete heater.
The Luno requires a pilot shield. This shield is
shipped with the unit. Ensure the shield is
installed over the pilot with the open end to the
left (when you are facing the front of the unit).
Inspect the Luno for visible or concealed damage.
The unit should appear to be square and true. The
metal parts should be smooth and free of bends and
dents. The painted surfaces should be free of
scratches flaking, or blemishes. If visible or
concealed damage is found or suspected, contact
your dealer for instructions.
Always use great care when handling the decorative
fire logs, as they are fragile and will break if handled
roughly. If a broken log is encountered, contact your
dealer for replacement logs. Otherwise, set the logs
aside until called for during the installation.
5

Other manuals for HASE LUNO

Related product manuals