To Next Page
J
Joseph ThomasSep 12, 2025
Why HATO 200 gate moves slightly?
- SSusan PorterSep 12, 2025
If the gate moves slightly, it indicates that the end positions are not set. Program the end positions anew in accordance with the instructions.
Why HATO 200 gate moves slightly?
If the gate moves slightly, it indicates that the end positions are not set. Program the end positions anew in accordance with the instructions.
Why HATO Garage Door Opener after turning the supply on, the drive does not carry out the test?
If, after turning the supply on, the drive does not carry out the test (the digits should change from "9" to "1") and the display shows a different character, it indicates a defective microcontroller.
Why HATO Garage Door Opener drive moves the gate in steps of a few centimeters?
If the drive moves the gate in steps of a few centimeters, it indicates that the engine speed sensor is defective.
Defines the primary intended use of the sectional door drive.
Provides essential safety and operational guidelines for users.
Details the features, functions, and components of the garage door drive system.
Lists key technical data, including power, speed, and environmental operating conditions.
Presents physical size measurements and lists all parts provided with the automation kit.
Guides through the step-by-step process of physically installing the drive unit.
Explains control buttons, external connectors, wiring, and verification of assembly correctness.
Details setting open/close limits and adjusting overload sensor sensitivity.
Covers installation of photocells and configuration of auto-closing function.
Explains programming remotes and activating the gate lock security.
Lists essential checks and verifications required after installation and programming.
General| Model | HATO 200 |
|---|---|
| Category | Garage Door Opener |
| Battery Backup | No |
| Warranty | 2 years |
| Motor Type | DC Motor |
| Remote Control | Yes |
