18 4001001030 E 06.20 USA / GB
Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) -
Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E)
A- Foreword
5 - Compliance
5.1 - P
RODUCT
MODIFICATION
It is strictly forbidden to modify a HAULOTTE® product. Any modification may violate Haulotte
design parameters, local regulations and industry standards.
All modifications must be submitted in writing (form) and approved by the manufacturer.
Do not hesitate to contact HAULOTTE Services®, should you have any questions relating to
the issued bulletin(s) or with questions on the policy itself.
5.1.1 - Implementing manufacturer safety campaigns
It is essential to implement the safety campaigns issued by the manufacturer. All of these
campaigns are accessible on our website.
Connect to our website : www.haulotte.com
5.2 - P
RODUCT
SPECIFICATIONS
HAULOTTE® cannot be held liable for any changes to the technical characteristics/specifica-
tions contained in this manual. HAULOTTE® has a continuous improvement policy in place
for its product range. Given this policy, the Company reserves the right to modify products
technical characteristics / specifications without notice.
Certain options/accessories can modify the machine's operating characteristics and its' asso-
ciated safety. If your machine was originally delivered with options fitted, replacing a safety
component associated with a particular option does not require any particular precaution other
than those associated with the installation itself (static test).
Otherwise, it is essential to follow the manufacturer's recommendations as stated below :
• Installation by authorised HAULOTTE® personnel only.
• Update the manufacturer's identification plate.
• Have stability tests carried out by a certified agency/competent person.
• Ensure decals are updated.
Never place a machine on the market without having applied the Safety Bulletins.
To Next Page
Loading...
