Haulotte C 3947E - Platform Control Box Operations; Starting and Stopping the Machine; Drive and Steer Control

78 4001001030 E 06.20 USA / GB
D- Operation instructions
Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) -
Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E)
3 - Platform control box
3.1 - T O START AND STOP THE MACHINE
To start the machine :
At the ground control box :
• The E-stop button on the ground control box must be in ON position (pulled out / activated).
• Turn the key on the control box activation selector switch ( 92 ) to the left to energize the
platform control box.
At the platform control box :
• Pull the E-stop button (46).
To stop the machine :
• Push in the E-stop button (46).
3.2 - D RIVE AND STEER CONTROL
3.2.1 - Control box - Standard
Drive and steer control
N.B.-:-T
HE RELEASE OF THE SELECTORS AND (OR) JOYSTICKS CAUSES ALL MOVEMENT TO STOP.
Activate the controls and the Enable Switch simultaneously to perform the various movements.
Command Action
Driving
1
.
1. When the platform is raised above 1,50 m(4 ft11 in), only micro-speed is possible
Push the movement joystick ( 108 ) forwards to move the machine
forwards.
Push the movement joystick ( 108 ) forwards to reverse the machine.
Front-axle steering
Push the front-axle steering selector thumb switch ( 108 ) to the right
to steer to the right.
Push the front-axle steering selector thumb switch ( 108 ) to the left to
steer to the left.