22
CHARGING THE BATTERY
Once the charger is set up by a qualified service person, charging begins when a battery of the
proper type, capacity and voltage is connected to the charger. While the charger is in idle mode
(No battery connected), the display will show the following information:
Charger Idle Display
S11
Starting a Charge Cycle
The charger will start automatically when a battery is connected, or by pushing the Stop/Start
button if the battery is already connected.
Delayed Start
If the charger was programmed for delayed start, charging will begin following that delay. When
the battery is plugged in to the charger, the display shows the time remaining before the
programmed charging starts.