35
www.coreservice.co.uk
Hotline: +44 01904 947568
Email support@coreservice.co.uk
Switch action
WARNING: For your safety, this tool is equipped with lock-off switch which prevents
the tool from unintended starting. NEVER use the tool if it runs when you simply
pull the switch trigger without pressing the lock-off switch. Return the tool to our
authorised service center for inspection BEFORE further usage.
WARNING: NEVER tape down or defeat purpose and function of lock-off switch.
CAUTION: Before installing the battery pack into the tool, always check to see that the
switch trigger actuates properly and returns to the "OFF" position when released.
NOTICE: Do not pull the switch trigger hard without pressing the lock-off switch. This can cause
switch breakage.
To prevent the switch trigger from being accidentally activated, a lock-off switch is provided. To start
the tool, depress the lock-off switch(11) and pull the switch trigger(13). Release the switch trigger to
stop.
To Next Page
Loading...
