995901PM140404A
EC CONFORMITY INFORMATION
EC DECLARATION OF CONFORMITY
1.16
1.16
VIBRATION INFORMATION
Lawnmower vibration information. RMS acceleration measured in 3 - axes at operators contact position on the
- steering wheel does not exceed 2.5ms
-2
- seat = 0.6ms
-2
EC DECLARATION OF CONFORMITY
HAYTER LIMITED,
Spellbrook, Bishop’s Stortford, Herts CM23 4BU ENGLAND
declare that the lawnmower:
Models: MT313
Machine Type No. CODE 995A
Category: Ride - on Lawnmower
Type: Cylinder
Engine - Manufacturer: Kubota
- Speed of rotation: 2800 rpm
Width of cutting device: 1830mm
Speed of rotation of the
cutting device: 1250 rpm
Complies with the provisions of Directive: 98/37/EC Essential Health & Safety Requirements Relating to the
Design & Construction of Machinery and Safety Components, as amended and the regulations transposed into
national law.
Also Directive 89/336/EEC Electromagnetic Compatibility, as amended and the regulations transposed into
national law.
Also Directive 2000/14/EC Noise emission in the environment by equipment for use outdoors, and the regula-
tions transposed into national law procedure applied for the conformity assessment: ANNEX VI, procedure 1.
Notified Body: Sound Research Laboratories Ltd. Holbrook House, Little Waldingfield,
Sudbury, Suffolk, CO10 02H. ENGLAND
Notified body identification No: 1088
Measured sound power level: 104 db(A)
Guaranteed sound power level: 105 dB(A)
Standards Used: EN292, EN836 and ENISO14982.
Authorised Signatory:
Signed Date: 18.02.04
Declaration done and Technical Documentation kept at:
HAYTER LIMITED,
M.A. Wright Spellbrook, Bishop’s Stortford,
(Technical Director) Herts CM23 4BU ENGLAND
To Next Page
Loading...
