Wheel Nut Torque Setting: Front axle 54 Nm
Rear axle 54 Nm
Service Brakes: Closed loop hydrostatic service braking operating on all three wheels.
Parking/Emergency Brake: Lever operated oil immersed disc brakes on front wheels only. Pressurised
hydraulic oil release with optional hydraulic override for emergency towing purposes.
Ground Clearance: 150mm at 13mm cut height and with cutterheads raised.
Steering: Hydrostatic rear wheel steering, emergency manual steering.
Features: Swing-out centre cutterhead.
Tilting operator platform.
Lockable engine cover.
Adjustable seat.
Adjustable steering column.
Cutterhead parking latches with safety locks.
Backlapping facility.
Limited lift cutterhead latches
Engine coolant and hydraulic oil overheat audible warning (horn).
Variable cutterhead weight Transfer/traction assistance.
Safety Features: Neutral start interlock on transmission pump, parking / emergency brake,
cutterhead drive switch and swing-out centre cutterhead.
Operator presence control (seat switch).
995901PM140404A
SPECIFICATIONS
VEHICLE SPECIFICATIONS
Travel Speed:
0-15 km/hr (0-9.3 mph) forward.
0-8 km/hr (0-5 mph) reverse.
Tyres Tyre Type
Front axle
Rear
0.7 bar min
(10 psi )
0.7 bar min
(10 psi).
1.4 bar
(20 psi)
1.4 bar
(20 psi)
Recommended Tyre Pressures
Turf Conditions
Max Pressure
Road Conditions
20 x 10 - 10 4 ply
Titan turf pattern.
20 x 10 - 10 4 ply
Titan turf pattern
1.5 bar
(22 psi)
1.5 bar
(22 psi)
1.21
1.21
To Next Page
Loading...
