Hayter MT313 - WEIGHT AND DIMENSIONS

995901PM140404A
SPECIFICATIONS
Wheel Base:
Working Width:
Cutting Width:
Transport Width:
Overall Length:
Overall Height:
Approx. Working Weight:
WEIGHT AND DIMENSIONS
RECOMMENDED LUBRICANTS AND HYDRAULIC FLUIDS
Grease Points: A good quality medium grease.
Engine: Refer - ENGINE OPERATORS MANUAL.
Hydraulic System:
Should you be in any doubt please contact your Hayter dealer. Using incorrect grades will cause
premature wear of hydraulic components and invalidate warranty.
1370 mm.
2080 mm.
1830 mm.
1625 mm at 13mm height of cut.
2380 mm.
1350 mm.
900 kg not including the operator, no options fitted.
(The exact weight depends on the machined cutterhead configuration).
Ambient Temperature Range
0 - 30 C (32 - 86 F)
I S O viscosity grade
46 hydraulic oil.
O
O
15 - 40 C (59 - 104 F)
I S O viscosity grade
68 hydraulic oil.
O
O
1.23
1.23