Hayward HLWLAN User Manual

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
HLWLAN 802.11b/g/n
Transceiver Kit
Owner’s Manual
HLWLAN
Wireless Communications for OmniLogic
Hayward Pool Products
620 Division Street, Elizabeth NJ 07207
www.hayward.com
Contents
Introduction.......................1
Installation........................2
Conguration....................6
Operation..........................8
Troubleshooting.................9
092524 RevC

Hayward HLWLAN Specifications

General

Frequency	2.4 GHz
Wireless Standard	IEEE 802.11b/g/n
Security	WEP, WPA, WPA2
Frequency Range	2.412 - 2.484 GHz
Modulation	DSSS, OFDM
Data Rate	Up to 150 Mbps
Operating Temperature	-20°C to 70°C
Type	Wi-Fi Transceiver
Range	Up to 100 meters (open space)
Output Power	18 dBm
Operating Voltage	5 V

Summary

Introduction

Compatibility

Details compatibility with OmniLogic MSP versions and how to check the version.

Before You Begin

Lists the contents of the HLWLAN kit and initial network requirements.

Installation

Router/Access Point Information

Explains the need for SSID, security type, and password for network configuration.

Mounting and Initial Connections

Details how to mount the HLWLAN and connect the PoE injector power cable.

Ethernet and PoE Connections

Covers connecting ethernet cables and the PoE port to the HLWLAN.

Configuration

Wireless Bridge Configuration

Guides through scanning for access points and connecting to the home network.

Operation

Signal Strength Indicators

Explains the WLAN and Signal Strength LED indicators for connection status.

OmniLogic User Account Setup

Details setting up a Hayward OmniLogic user account for remote access.

Troubleshooting

LED Status Issues

Addresses problems where PWR and LAN LEDs are not lit.

Network Connectivity Issues

Covers lack of 'Local IP' address or inability to connect web-enabled devices.