Need help?Do you have a question about the Hayward POOL Rx Socket and is the answer not in the manual?
General| Brand | Hayward |
|---|---|
| Model | POOL Rx Socket |
| Category | Lighting Equipment |
| Language | English |
Install on wall shelf, away from fumes, in ventilated area up to 45°C.
Identification of connection points A, B, and C on the device.
Verify unit label values match main power supply.
Use a relay to avoid direct parallel connection to the circulation pump.
Recalibrate the unit with the measuring probe every 3 months or if measurement drifts.
Dip in acid solution, rinse with water, do not leave dry.
Always keep electrodes in original caps with conservation liquid.
Press SET for 3s, select value 300-800mV, wait 5s to auto-save.
Requires minutes, follow sequence, ensure buffer solution is correct and clean.
Ensure buffer solution matches indicated value and is not soiled.
Regulator displays mV, powers outlet based on setpoint comparison.
Example of ON-OFF operation based on mV readings vs. setpoint.
To Next Page