HBM QuantumX MX1615B - Page 4

4 A3031-15.0 HBM: public Quantum
X
6.4.6 Backplane with IEEE1394b FireWire connection 57...............
6.4.7 System layout with several backplanes 58........................
7 Connecting individual QuantumX modules 59.................
7.1 Connecting the supply voltage 59...............................
7.2 Connection to host PC or data recorder 62.......................
7.2.1 Single Ethernet connection 62..................................
7.2.2 Multiple Ethernet connection with PTP synchronization 63..........
7.2.3 Multiple Ethernet connection and FireWire synchronization 64......
7.2.4 Connecting one or more QuantumX modules to the PC 65.........
7.2.5 Firmware update via Ethernet 73................................
7.2.6 Connection via FireWire (IEEE 1394b) 74........................
7.2.7 Setting up FireWire 1394b on the PC 75.........................
7.2.8 Multiple FireWire connection 77.................................
7.2.9 Layout with data recorder CX22B‐W 78..........................
7.2.10 Output measurement signals to CAN bus (MX840B) 79............
7.2.11 Output measurement signals to CAN bus (MX471B) 79............
7.2.12 Output of signals with standardized voltage in real time (MX878B
or MX879B) 80...............................................
7.2.13 Output signals in real time via EtherCAT® and in parallel via
Ethernet 81..................................................
7.2.14 QuantumX in the FireWire group 82.............................
8 Modules and transducers 84.................................
8.1 General information 84........................................
8.1.1 Shielding design 84...........................................
8.1.2 Active transducer connection 86................................
8.1.3 TEDS 88....................................................
8.1.4 Background calibration / autoadjustment 91......................
8.2 MX840/A/B universal amplifier 93...............................
8.2.1 MX840B pin assignment 95....................................
8.2.2 MX840B status display 97.....................................