HCI RM22A - Advanced Setup: Closed Captions and FM; Closed Caption Settings; FM Setup Options

------------------------------------------------- ------------------------- - RM22A/RM22D OPERATIONS MANUAL
HealthCare Information, LLC 17
C losed Se ts Closed Caption mode.
Ca ption
CC M ode Sets Closed Caption mode. Selections are.
Off – ON – CC on & Mute – CC off & Mute
O ff Closed Captions off.
ON Closed Captions on.
CC on & Mute
CC off & Mute
Basic Sets which closed caption mode wil l be used when CC Mode is set on. Selection s
Selection are:
CC1 - CC2 - CC3 - CC4 - Text1 - Text2 - Text3 - Text4
A dvanced Sets which closed caption mode will be used when CC Mode is set on in DTV
Selection mode. Selections are:
Service1 - S ervice2 - Service3 - Service4 - S ervice5 - S ervice6
FM S etup Settings for FM reception. NOTE: FM signals must be available on the coax feeding TV
channels to the set.
C hannel No . Selects the favorite FM channel to edit . Up to 10 favorites may be stored.
F requency Used to enter the frequency of the selected C hannel NO. Use the right / left arrow
keys to select the digit to enter and the up / down arrow keys or the number keys to
change.
C hannel Used to enter a station ID label for the selected C ha nnel NO. This label will be
L abel displayed if the On Screen Display is set on. See SCR Mode . Use the right / left
arrow keys to select the character to enter and the up / down arrow keys to change.
F avorite Turns favorite function on and off.
S creen Mode Set the background screen mode during FM operation. Selections are:
B lack S creen - Blue S creen – B acklight Off –
B lack S creen + OSD - Blue S creen + OSD
B lack Screen Black screen only.
B lue Screen Blue screen only.
B acklight Off S creen off. LCD back light turned off.
B lack Screen + OSD Black background with FM On Screen Display.
Blue Screen + OSD Blue background with FM On Screen Display.
FM L evel Sets the minimum FM signal strength the set will stop at when scanning. This
allow s weak channels to be skipped.
S earch Auto searches for FM channels.
S ave Save s the current FM setup into permanent memory. The TV will store all settings
into operating memory. These settings will not be lost if there is a power outage.
This func tion allows the saved settings to be reloaded into operating memory should
someone change t he settings accidentally. Any p re vious saved settings will be lost.