HCI RM22A - Channel Menu Configuration; Signal Source and Channel Scan; Bank Control and Editing; Channel Management Features

------------------------------------------------- ------------------------- - RM22A/RM22D OPERATIONS MANUAL
HealthCare Information, LLC 20
C hann el Menu
Air / C able Selects signal source . Selections are:
Air – Cable
Air Select if using off air antenna.
Cable Select if connected to cable system.
A uto Scan Automatically scans for available channels.
Cable Determines type of c able system being used. Selections are:
System
AUTO – STD – IRC – HRC
A UTO Automatically determines cable type. Default setting.
STD Standard cable systems. Most US.
IRC IRC Cable systems.
HRC HRC Cable systems.
Start Scan Starts auto scan process.
NOTE: To manually add and delete channels, see BAN KS on page 30 .
B ank Control Bank control and editing. See page 30 .
B ank Sets the active bank.
Save / Restore Saves or restores bank to or from permanent memory .
Ba nk
Bank Edit Manually add and delete channels from the program banks.
F avorite Displays a list of all channels. Highlight any channel and press “ENTER” to add or
delete selected channel to or from the favorites list. A check mark on the right
indicates the selected channel has been added to the favorites list.
C hannel Displays current channel number . Use right and left arrow buttons to change
c hannel . Selected channel will be displayed behind the menu.
C hannel Label Used to enter a channel label for the currently selected channel. See
“CHANNEL” above. Use the left and right arrow buttons to select the character
and the up and down arrow keys to change the selected character. Press and hold
the up or down arrow buttons to scroll th rough the characters at a fast rate. Press
the "BACK" button when done.
DTV S ignal Displays current quality of DTV input signal.